need some help?

general

Definitely. Wishbone Design Studio products are meant to be used and repaired, if necessary, for years to come. Go to www.shopwishbonedesign.com to buy spare parts


1 Commit to the big day when you will convert from three to two wheels.

2 Tell your child they have graduated to riding a big kids’ bike and the world is their oyster from this day forward .
3 Plan to take your kid riding on their big-kid two-wheeler Wishbone Bike every day or so for the next couple of weeks. Its okay if they ride only for just 1 minute the first time. Each day should be a wee bit longer
4 Make it fun – play shadow-chasing, tag or run races with your child on their big-kid bike.
5 If your child is not loving it, give it a rest for a day.
6 Go on family trips to the park with everyone riding a two-wheeler.
7 And remember, every kid is different. Some find it easy, some take longer. With Wishbone Bike, you can always go back to three wheels and wait for more auspicious timing. Good luck!


Check out this page with info for retailers, then complete the application form providing information on your business, other brands you sell, and why you would like to work with us.


Our products are made in China. Our factory is regularly audited for social and ethical accountability.


Contact us at info@wishbonedesign.com or by phone during NZ office hours on +64 43891959.


shipping & returns

For orders over 99.00, we offer FREE SHIPPING to the following destinations: New Zealand, Australia, UK, USA, Canada, and Central Europe (excluding Switzerland) – and to other destinations we charge $70 shipping, or $150 shipping for order value over $298.

For orders under 99.00 we charge $7-$35 ship fee, just check your shopping cart for the exact amount.

(Note: For Africa & Canary Islands write to info@wishbonedesign.com to check our shipping charge – our webshop may underquote shipping to your location.)

Customs duties and other fees may be charged on importation to locations outside of USA, Canada, NZ, Australia, and EU countries. These are your responsibility. For express freight ask for a custom express freight quote from info@wishbonedesign.com or 1-888-748 7453.

We reserve the right to cancel and refund any order at any time at our discretion.


Usually, your order will ship within 48 hours via standard service out of our closest warehouse (Wellington, Melbourne, Toronto, New Jersey, Netherlands) and arrive within the following days after the date of dispatch:

Netherlands/New Zealand: 1-2 business days

Belgium/Germany: 1-4 business days

Rest of Europe/United States/Canada/Australia: 1-7 business days

Rest of World (ships from New Zealand via FedEx): 1-7 business days


If you change your mind before you receive your order, email us at info@wishbonedesign.com. If we have not yet shipped your order we will cancel it and be happy to refund in full.
If we have shipped your order, you can return unused items to us within 90 days of purchase.
Your Wishbone product must show no signs of use and have all original inner and outer packaging and instructions manual present.
After inspecting and approving your return, we’ll issue a full refund minus $40 shipping & restocking fee, to the method of payment you originally paid with.
Same applies if delivery is refused for any reason.
Before return shipping, contact us at info@wishbonedesign.com to request a RRN (returns registration number) and our returns delivery address.


assembly

No worries, it’s easy. Rich’ll show you how.

Wishbone Bike Original:
Wishbone Bike Recycled Edition:
Wishbone Flip & Mini-Flip:
Wishbone Wagon:

Your Wishbone Bike arrives pre-assembled except for the handlebars and wheels. You will need to choose whether to assemble your bike with three wheels or two wheels. Consult the assembly manual for help. You will need your own Phillips screwdriver to assemble the handlebars, and a 10mm wrench to flip the frame. Everything else is supplied with the bike.


Wishbone Flip comes fully assembled except the handlebar. Wishbone Mini-Flip comes in three parts – Top, Base and Wheels. Use the hex keys supplied to connect the Base to the Top and attach the wheels and handlebar. Follow our easy video instructions here.


product info & care

Inspect your bike or flip frequently to be sure its in good repair and all fastenings are tight. Normal wear and tear may make them loosen.

Always store your Wishbone indoors overnight where it is warm and dry.

Maintain your wooden toy’s appearance by cleaning with a damp cloth and using a wood wax or polish to maintain the wood finish.

If your Wishbone Bike wheels are not moving smoothly, lubricate them lightly with a standard bicycle oil.

We recommend you keep all tyres inflated to 20 psi, not more. Tube valves are car size – pump them up when you visit the gas station.


Wishbone Bike Original 3in1

Boxed: Weight, 7kg. Dimensions, 74 x 39 x 15 cm

Assembled: Weight,5.4kg. Dimensions, 102 long x 50 wide x 49 cm high. Adjustable seat height 28 to 46 cm. Recommended age: 1 to 5 years.

Wishbone Bike Recycled Edition 3in1

Boxed: Weight, 8.3kg. Dimensions, 79 x 50 x 13 cm

Assembled: Weight, 6.6kg. Dimensions, approx 110 long x 50 wide x 47 cm high. Adjustable seat height, 23 to 51 cm. Recommended age: 1 to 6 years.


Wishbone Bike is recommended for use by children aged 1 to 5 years. The seatpost is adjustable from 28 to 46cm (11 to 18 inches), the greatest range of any balance bike on the market! You can measure the length of your child’s inner pants’ seam to figure out if they will be able to straddle the bike seat yet or not. Both your child’s feet should be able to rest flat on the ground when they’re using the bike.


You can remove the inner tube from the tyre and repair it with a simple bike tube repair kit available at any bike store. You can pump the tube up again using a bike pump or at a gas station. Wishbone Bike tyres have a “schraeder” valve – the same as your motor car. But be careful not to overpump the tyre – 25psi is enough.


Your RE bike frame’s batch code can be found on your bike frame, molded inside the circular area near where the rotafix bolt is inserted. The manufacturing year is the number in the centre of the code. For example, 13 means 2013.


Simply rub a dot of liquid soap inside the handgrips, then they slide on easily.The easiest way to remove the grips is to peel them back and roll them off. You’ll need to do this when you’re ready to flip the frame from low to high position.


Yes. Wishbone Bike complies with current US, European, Australian, New Zealand and international toy safety standards.


You can buy any replacement parts, including inner tubes, for Wishbone Bike from Wishbone Design Studio on www.shopwishbonedesign.com.


Wishbone Flip

Boxed: Weight, 4.1kg. Dimensions, 65 x 25 x 29 cm

Assembled: Weight, 2.6kg. Dimensions, 64 long x 35 wide x 40 cm high. Adjustable seat height 22 to 27.5 cm. Recommended age: 1 to 5 years.

Wishbone Mini-Flip

Boxed: Weight, 3.2kg. Dimensions, 55.5 x 25 x 23 cm

Assembled: Weight, 2.1kg. Dimensions, 54 long x 23.5 wide x 39 cm high. Adjustable seat height 21 to 23 cm. Recommended age: 9 mths to 3 years.


Wishbone Flip arrives in the box in rocking mode. It can be flipped into rolling mode and back again in seconds with the use of a latch – no tools are required.

There are different ways to flip the toy. We think this is the simplest method:

1 Place your Flip upside down on a flat surface.
2 Press and turn the latch to disconnect one end of the base.
3 Lift the free end of the base up as you slide the knob along the slot.
4 Reconnect the latch.

Watch how to flip here.


Flip and Mini-Flip can grow a little with your child. There is a second set of holes in the lower section of the shell for you to raise the seat height. Just undo the nuts and bolts that hold the two halves of the shell together using two hex keys, and replace them in the higher holes.

Mini-Flip Race Base Upgrade Kit is ideal for your little one’s second birthday. It is an interchangeable base for your Mini-Flip Top and comes with caster wheels which spin 360 degrees. Perfect for toddlers who love a thrill.


You can get replacement caster wheels from the Wishbone online store.

To remove a broken wheel, use a flat headed screwdriver to lever the wheel off. Watch Richard, the Flip’s designer, demonstrate how to do this here. [link to youtube vid.]. It requires a fair bit of grunt. Make sure you protect the wooden rail with a piece of wood or a thin book or a coaster or something – otherwise you’ll dent your poor little Flippy.

The new caster simply pushes on. Keep pushing until you hear a dull click – then it’s properly installed.


You’ll need to remove the handlebar. Still not fitting in the box? Make sure the caster wheels are lying flat at the bottom of the box. Should fit now.


Boxed: Weight, 4.1kg. Dimensions, 82 x 48 x 23.5 cm

Assembled: Weight, 2.6kg. Dimensions, 82 long x 63 wide x 38 cm high. Recommended age: 1 to 10 years.


warranty

Wishbone Bike Recycled Edition and Wishbone Cruise each have a five year limited warranty*. All other Wishbone products have a one year warranty against manufacturing defects and workmanship. Our products are designed so that 100% of the components are repairable and replaceable. Whatever the problem, we have replacement parts to solve it. For eco reasons, we send out just the parts that are required. It is highly unlikely that an entire bike, flip or wagon will ever need to be replaced.

To make a warranty claim just follow these steps:

1. Email us at info@wishbonedesign.com with your name and contact details (email, phone, delivery address).

2. Tell her which product you have, its batch number and briefly describe the problem.

3. Attach nice and sharp, close-up photos of the issue. Including a quick video earns you extra brownie points.

4. Include your dated proof of purchase (purchase receipt, credit card, or bank statement) if you can.

* 5 year limited warranty: Wishbone’s limited warranty does not cover normal wear and tear, improper assembly or maintenance, damage due to accident, misuse, abuse or neglect, cosmetic deterioration of wooden components or rust.


We have warranted our products against manufacturing defects and workmanship for one year from the date of purchase. Within this period, we will be pleased to repair or replace free of charge any product or component that has a manufacturing defect. (In some countries you may have more rights too.) Your first contact point for any warranty query is the store where you bought your Wishbone product.

Our warranty extends to an original purchaser who bought new product from an authorized dealer of our products. Please have your proof of purchase ready. Any freight charge to deliver the product back to us or our representative is all you may need to pay. Please don’t ask for a full replacement – Wishbone products are carefully designed to be 100% repairable.

If you bought your Wishbone product second hand (well done!) or have modified it somehow, if you have not used or maintained it properly or if the problem is really just normal wear and tear, then you don’t qualify for our free-of-charge repair-or-replace warranty. But you are welcome to contact us anyway. We’ll do our best to help you.


Be ready in all cases to email us at info@wishbonedesign.com with:

Your batch number
Proof of purchase
Photos (good quality photos mean we probably won’t need anything returned)
You can also register your product with us.

This warranty and any other provided with the product is made in lieu of all other warranties, express or implied, including, but not limited to, warranties of merchantability or fitness for a particular purpose and there are no other warranties that extend beyond this warranty.


safety & recalls

Please read our July 2015 safety message below for more information about a pinch hazard in certain Recycled Edition Wishbone Bikes.

This update is to inform owners of affected bikes that we are completing production of our Wishbone Headset Cover now. If you have registered for a cover, we will be sending yours to you in October 2015, as soon as we are able.


Wishbone Design Studio is committed to maintaining the highest safety standards for all our riders.

Wishbone has recently received three reports globally of young riders who injured their finger by catching it between the frame and headset of a Wishbone Bike Recycled Edition (RE Bike).

Two RE bike batches made in December 2013 and May 2014 are affected by this pinch point hazard. Your bike’s batch number can be found on the front frame component, as shown in the picture at the bottom of this letter.

We are saddened that any young rider has been hurt using our RE Bike. Our response is to proactively supply free of charge a simple neoprene headset cover to any owner of an affected RE Bike.

If you own an affected RE bike, please stop riding and collect your free headset cover either from the store where you purchased your bike or by registering anytime directly with us.

Note: This message only relates to Recycled Edition Wishbone Bikes made in December 2013 or May 2014. No other batches of RE Bikes and no wooden Wishbone Bikes or other Wishbone products are affected.

Any questions or comments can be sent to info@wishbonedesign.com or call USA 1 888 748 7453 or other countries call New Zealand +64 4 3891959.

Thank you for reading our safety message. Happy Riding from Wishbone!